Lighting

Lumens explained: how bright a torch do you need?

By Tom, editorReviewed 6 minute read
On this page
  1. What a lumen measures
  2. Reference points you already know
  3. How many lumens each job needs
  4. Lumens are only part of the picture
  5. Why the headline figure can mislead
  6. Brightness against battery life
  7. What to buy on the strength of this
  8. Common questions
Lumens explained. How bright a light you really need
The short answer

Lumens measure the total amount of light a torch or lantern gives out. For a power cut you need far fewer than the packaging suggests: about 10 to 30 lumens to move around safely, 50 to 150 to read or cook, and 200 to 400 to light a living room. Higher figures mostly shorten battery life.

Key points
  • Lumens measure light output. Watts measure the power used to make it.
  • A candle is about 12 lumens. An old 60 W bulb was about 800.
  • Most power cut tasks need under 300 lumens.
  • The headline figure is the top setting, which often lasts only a short time.
  • Compare lights by runtime on the setting you will really use.

What a lumen measures

A lumen is a unit of light output. The lumen figure on a box tells you how much visible light the product gives off in total, in every direction, on its brightest setting.

It replaced watts as the way to compare lights when LEDs arrived. Watts measure the electricity a light uses, which told you something when every bulb was the same type. An LED makes the same light from a fraction of the power, so watts no longer say how bright anything is. As a rough guide, a modern LED gives around 100 lumens for each watt it draws.

Reference points you already know

Numbers mean more next to familiar things. These are approximate.

Light sourceApproximate lumens
One candle12
Small keyring light10 to 20
Old 40 W filament bulb400 to 450
Old 60 W filament bulb800
Old 100 W filament bulb1,500

So a lantern rated at 400 lumens gives about as much light as the 40 W bulb that used to sit in a bedside lamp. That is plenty for a room when it is the only light and your eyes have adjusted to the dark. The candle figure also shows why torches beat candles so easily on brightness.

How many lumens each job needs

In a dark house your pupils open up and you see well on very little light. These ranges are a practical guide, and a touch more helps older eyes.

  • Finding your way to the bathroom or stairs: 10 to 30 lumens. More than that at 3am is dazzling.
  • Reading, cooking, first aid, playing a board game: 50 to 150 lumens aimed at the task.
  • Lighting a living room for a family: 200 to 400 lumens from a lantern placed high.
  • Checking outside, looking down the garden or along the street: 300 lumens and up, in a focused beam.

None of these calls for the thousands of lumens printed on some torch packaging. For indoor use, a very bright torch reflects off pale walls and leaves you unable to see anything for the next minute, which is worth remembering when you are deciding which light is best for a power cut.

At a glance: Lumens measure light output. Watts measure the power used to make it.; A candle is about 12 lumens. An old 60 W bulb was about 800.; Most power cut tasks need under 300 lumens.; The headline figure is the top setting, which often lasts only a short time.; Compare lights by runtime on the setting you will really use.
Lumens explained: how bright a torch do you need?: the main points on one card.

Lumens are only part of the picture

Two lights with the same lumen figure can look very different, because lumens count the total light and say nothing about where it goes.

A torch gathers its light into a beam. All of it lands on a small patch, so that patch looks very bright and the rest of the room stays dark. A lantern spreads the same light in all directions, so nothing is dazzling but everything is visible. This is why a 200 lumen lantern lights a room better than a 1,000 lumen torch lying on the table.

Colour matters too. Warm white light (a yellowish tone, like an old bulb) is easier to live with for a whole evening than a harsh blue-white, even at the same lumen figure, so check the light colour as well as the brightness when comparing lanterns for power cuts.

Why the headline figure can mislead

The big number on the box is the maximum output, and maximum is often a short burst. Many compact torches step down from their top mode after a minute or two to stop the LED overheating. The battery could not hold that output for long in any case.

Reputable makers quote figures under a common standard called ANSI FL1, which sets out how to measure output, runtime and beam distance. Under that standard, runtime is counted until the light has faded to 10% of its starting output, so a torch quoted at 10 hours may be noticeably dim for much of that time. Lights from unknown brands with enormous lumen claims and no stated runtime deserve some doubt.

Look for a table on the box or listing that gives lumens and hours for each mode. If it only gives one big number, you cannot tell how the light will behave on day two.

Brightness against battery life

In a power cut the scarce thing is stored energy, and brightness spends it. The relationship is roughly proportional: run a light at a quarter of the output and it lasts around four times as long, often more.

A simple sum shows what brightness does to how long an LED lantern lasts. A lantern with an 18 watt-hour battery (a typical single rechargeable cell) driving a 3 watt LED on high lasts about five hours once losses are allowed for. The same lantern at half a watt on low runs for about 30 hours. That is the difference between one evening and a whole week of evenings.

Recharging is cheap by comparison with anything else you might run. Topping up that lantern takes a small share of a 20,000 mAh power bank.

What to buy on the strength of this

For indoor use, ignore the race for big numbers. A torch for power cuts with a low mode of 20 to 50 lumens and a high mode of 300 or so covers the house and garden.

Common questions

Is 1,000 lumens too bright for indoors?

For most indoor jobs, yes. It causes glare off walls and drains the battery quickly. It is useful outdoors, so a torch with 1,000 lumens on high is fine as long as it also has a proper low mode.

What is the difference between lumens and lux?

Lumens are the total light a source gives out. Lux is how much of that light lands on a surface, measured as lumens per square metre, so it depends on distance and beam width.

Do more lumens mean a longer beam?

Not necessarily. Beam distance depends mainly on how tightly the reflector or lens focuses the light. A narrow-beam torch can reach further than a wide one with more lumens.

How many lumens is a phone torch?

Makers rarely publish a figure. In practice a phone torch is comparable to a small pocket torch: enough to find your way, with a wide, short beam.

Sources and further reading

Reviewed against these sources on 18 November 2026. If official advice has changed since, follow the official advice.

General information only. This page is not professional, safety, medical, legal or financial advice, and it is not official guidance. No national blackout has been forecast or announced, and nothing here suggests one is expected. We are independent and have no connection to the government or any energy company. Always check the official sources linked on this page. Full disclaimer

Who writes this

Tom, editor

Editor, UK Blackout Guide

Tom edits UK Blackout Guide. He is not an electrician or an emergency planner, and the site does not pretend otherwise. The job here is to read the official guidance, the network operators' advice and the product listings, then set it out plainly and say where each fact comes from.

About UK Blackout Guide · How we write and check our guides

Keep reading